Anakin Skywalker ROTS - Clampmodification

Anakin ROTS - Clamp Modification Page 1

[ Back ] Page 2---->

The Anakin ROTS lightsaber surely is one of the best sabers and is suitable for all conversions. Whether converting it as a Luxeon or getting new electronics, e.g. by Hyperdynelabs or other suppliers, is possible with this saber. With a bit of time and patience, necessary modifications are no problem. I personally do not like the swith, because it is made of plastics, which does not hold the colour so it chips off after a time. It also happens that you deactivate the saber accidentally because the switch is clumsy. Another optic matter is the cover panel on the clamp. It is made of plastics to and the colour peels of, too. Because of that I want to give you an example how to convert the clamp and build in a manometric switch.

Do the following:
Remove the cover panel on the clamp and the screws underneath. Then unsolder the original switch (see tutorial/conversion Anakin ROTS). It will not be needed because it will be replaced by a new one. Now the black, inner plastic element must be dealt with. Therefor you need for example a plastic profile and cut the parts you need for the modifications.

Two of these parts will be glued on the inner plastic element so it becomes more rugged. The third part will be glued into the clamp itself on the position where the original switch was situated.
Now a manometric switch is necessary. To get one is not very easy because we did not find a trader offering this switch. The solution I found on “Elektro-Conrad”. There small LED-flashlights are offered for 6 Euros which contain this switch.

Page 2---->

[ Back ]