The disassembling is to be implemented this way:
- First of all the blade, the locking ring and the battery tray are removed.
Picture 1
- Now one has to lift the golden platine on top of the clamp cautiously to be able to detach the two screws underneath.
Picture 2 and
Picture 3
- After that the activator box with the switch can be removed from the hilt.
Picture 4
- Afterwards the switch can be desoldered and the cable is to be pushed into the hilt piece.
Picture 5
- The small screw underneath the activator box is to be detached next
Picture 6
- After having removed the screw the body with the electronics can be slid out of the hilt piece.
Picture 7 and
Picture 8
|
The Lightsaber
···